Diamond File for Chris Alsop Bevel Files

This item is for ONE spare file for some Chris Alsop Guitar Fret End Bevel Files. (see compatibility list below). It is JUST the diamond coated metal file and the handle is NOT included.
The complete tool (handle and file) can be purchased from our other listings in our Fret Bevel Files Section.

This file is designed to slide into the Chris Alsop Guitar Fret End Bevel File Tool. This tool allows the files to be exchanged by a simple 3 hex bolt mechanism.
All sharp edges are ground smooth on these files and so they can be used for a variety of guitar jobs such as re-profiling the frets crowns after the frets have been leveled. As with any abrasives used near a guitar - always use adequate shielding of the fretboard, guitar body, pickups etc.

Suitable for Stainless Steel frets.

Compatibility
These files are suitable for use with the following Chris Alsop Guitar Fret Bevel Files. PLEASE CHOOSE THE CORRECT MODEL

Wider File (approx 23.5mm Wide / 150mm Long)

• TF013 35 Degree Bevel File
• TF014 Dual Angle 35 and 90 Degree Bevel File
• TF040 10 Degree Bevel File
• TF041 45 Degree Bevel File
• TF043 15 Degree Bevel File

Narrower File (approx 15mm wide  / 150mm Long)

• TF015 Fret End Bevel File with Adjustable File Protrusion

Half Size Files ( approx 15mm wide  / 75mm Long)

• TF016 Half Size Fret Bevel Diamond File. Ukuleles, Mandolins

Mini  Files ( approx 24mm wide  / 45mm Long)
• TF027 Mini Bevel File 35 & 90 Degrees with Diamond File

FREE With This Item

• A comprehensive guide to fret replacement