35 Degree Fret Bevel File with Beech Handle
- Product Code: TF060
- EAN: 5060489151537
- Availability: In Stock
£29.61 each & FREE Delivery in UK.** Order by 9.00am for SAME DAY DISPATCH **
This is a diamond file bonded to a handle which allows it to be guided along the fretboard with the file cutting an accurate bevel on the fret ends.
The handle is constructed from European Spalted Beech Hardwood and the base, the surface which glides along the fretboard, is made of a very low friction, high-grade engineering polymer. These files last for many fretboards and are equally long lasting on stainless frets and normal nickel silver frets.
Please note that as these handles are made from natural products there may be variation in the wood colour, some due to spalting which gives patterns in the wood.
• 35 Degree Angle Bevel File
• 150mm File Length
• Fine Grit Diamond File Fitted
The tool provides an efficient and easy to use solution to getting the fret ends cleanly cut to a specific angle. We have experimented with many designs for these and have come up with this solution which has the following main features:
• For beveling the fret end the file is set at 35 degrees.
• Very comfortable to hold file.
• Diamond File permanently bonded into the handle.
• The file protrudes from the handle so you can see how the cut is progressing.
• Smooth base made of low friction polymer, which is bevelled at the ends. This base makes it easy to pass over the fret tops without bumping or damage.
• The cutting file is a fine grit diamond file which leaves a good finish - see the closeup photo - and all that is needed is the final light sanding to remove any scratches or uncomfortable edges and finally a polish - and the job's done.
• Robust construction from highest grade engineering polymer, European Beech Wood and professional quality diamond file.
• Suitable for Stainless Steel frets.
Fret Beveling in General.
The main advantage of using a Bevel File is that a really consistent professional job is achieved where all the fret ends are at the same angle. This main point about bevelling is to make sure there are no sharp edges or uncomfortable fret ends which hamper playing. If a fret end is too long then it disturbs the feel of the neck as the player moves around the fretboard; if the fret end angle is too shallow then the string can easily start to slip off the end of the fret. It is also surprising just how much of the fretboard space is used up by the bevels - a 45 degree bevel will use about 1mm of the fret wire and so reduce a 43mm neck to 41mm playable width.
We sell many different angled bevel files please see our Fret Bevelling Category
FREE With This Item
• Advice Sheet on use of this tool
• A comprehensive guide to fret replacement
|Dispatch Time and Shipping Method|
|Dispatch Time||** Order by 9.00am for SAME DAY DISPATCH **|
|UK||Royal Mail 1st Class Signed For|
|International||Royal Mail International Airmail Tracked|
|Shipping Costs For This Product|
|Single Item Shipping Cost
|Combined Shipping Cost
(at 75% Discount)
|Combined Shipping Cost||The cost is calculated as |
1) The item with the highest postal rate is charged at full rate
2) ALL additional items are charged at the discounted rate of 75%
TOTAL SHIPPING COST =
(Highest Postal Cost Item @ Full Rate) + (Additional items @ Discounted Rate);
|Length||150mm File Length|
|File||Diamond File set at 35 Degree Angle|
|Handle||Low Friction High Engineering Grade Polymer|