Fender Bass Black Buffalo Horn Pins with Flat Head
These pins are for an acoustic Fender Bass and are made from English Farmed Water Buffalo Black Horn with an Abalone inlay.
The pins are 8.0mm diameter at the top of the cone and 7.8mm at the base of the cone.
The pin head is flat and inlaid with green Abalone. THe head is about 13mm diameter.
Ball Diameter 13mm. Top of Cone 8.1mm. Base of Cone 7.8mm. Length 26mm.
Fender Bass Black Buffalo Horn Pins with Flat Head
These pins are for an acoustic Fender Bass and are made from English Farmed Water Buffalo Black Horn with an Abalone inlay.
The pins are 8.0mm diameter at the top of the cone and 7.8mm at the base of the cone.
The pin head is flat and inlaid with green Abalone. THe head is about 13mm diameter.
Ball Diameter 13mm. Top of Cone 8.1mm. Base of Cone 7.8mm. Length 26mm.
Parallel Buffalo Bone Pins with Short Stock and Sperical Head
These pins are made by Chris Alsop in his workshops in Derbyshire, UK. The pins are plain, undecorated on the pin head.
The pins are 8.0mm diameter under the collar and parallel to the base of the pin.
The pin stock is short being only 6mm long
The pin head is spherical and about 10mm diameter.
Parallel Buffalo Bone Pins with Short Stock and Sperical Head
These pins are made by Chris Alsop in his workshops in Derbyshire, UK. The pins are plain, undecorated on the pin head.
The pins are 8.0mm diameter under the collar and parallel to the base of the pin.
The pin stock is short being only 6mm long
The pin head is spherical and about 10mm diameter.
Customer required 3 saddles with reducing heights. The second and third saddle were 1.5mm and 2.0mm lower than the first saddle. Please note that the product price displayed is PER SADDLE
Bone Nut made from UK farmed Water Buffalo Bone. As the original nut was broken, the nut was modelled using customer dimensions such that the customer could then check the model was correct prior to manufacture and dispatch. String spacing is Even Gaps between string edges, which is common on acoustic guitars.
Length 43mm. Width 5mm. Height In Middle 8mm. Radius 12 inch. Right Handed. String Spacing Even Gaps between String Edges.
1965 Gibson Country Western Accoustic Guitar Saddle Replacement in Bone
This new bone saddle replaced an adjustable ceramic saddle where the saddle sits on screws that are attached to the bridge. There can be a much improved tone by having a solid piece of bone - as long as it is not too heavy which can dampen the vibration due to sheer inertia. We use UK farmed Water Buffalo Bone which is reknowned for it's acoustic properties
Length 83mm. Width 6.8mm. Height In Middle 11mm. Right Handed. No Compensation.
1965 Gibson Country Western Accoustic Guitar Saddle Replacement in Bone
This new bone saddle replaced an adjustable ceramic saddle where the saddle sits on screws that are attached to the bridge. There can be a much improved tone by having a solid piece of bone - as long as it is not too heavy which can dampen the vibration due to sheer inertia. We use UK farmed Water Buffalo Bone which is reknowned for it's acoustic properties
Length 83mm. Width 6.8mm. Height In Middle 11mm. Right Handed. No Compensation.