** ORDER BY 2pm FOR SAME DAY DISPATCH & FREE UK SHIPPING on most tools **
TWO Fret Bevel Files 35 and 90 Degrees
TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees TWO Fret Bevel Files 35 and 90 Degrees
TWO Fret Bevel Files 35 and 90 Degrees
£42.28 each & FREE Delivery in UK. Shipping
** Order by 2pm for SAME DAY DISPATCH **
MPN: TF065   EAN: 5060489151551  In Stock

These are TWO fret end bevel files where each has a diamond file mounted in a handle which allows it to be guided along the fretboard with the file cutting an accurate bevel on the fret ends.

One tool has the file set at 90 Degrees (for cutting the frets level with the fret board) and the second tool has the file set at 35 degrees to bevel the fret ends .

The handle is constructed from European Beech Hardwood and the base, the surface which glides along the fretboard, is made of a very low friction, high grade engineering polymer.
These files last for many fretboards and are equally long lasting on stainless frets and normal nickel silver frets.

Dimensions
• 90 Degree Angle Bevel File
• 35 Degree Angle Bevel File
• Each tool fitted with 150mm File Length
• Fine Grit Diamond File Fittted

Features
• The 90 degree file is used for filing the ends of the frets level with the ends of the fretboard.
• The 35 degree file is then used for bevelling the fret end.
• Very comfortable to hold file.
• Diamond File permanently bonded into handle.
• The file protrudes from the holder so you can see how the cut is progressing.
• Smooth base made of low friction polymer, with bevelled at the ends. This base makes it easy to pass over the fret tops without bumping or damage.
• Robust construction from highest grade engineering polymer and professional quality diamond file.
• Suitable for Stainless Steel frets.

Fret Beveling in General.
The main advantage of using a Bevel File is that a really consistent professional job is achieved where all the fret ends are at the same angle. The 90 degree file is to be used for filing the ends of the frets level with the ends of the fret board. After this, you can then bevel the frets with the 35 degree file.
This main point about bevelling is to make sure there are no sharp edges or uncomfortable fret ends which hamper playing. If a fret end is too long then it disturbs the feel of the neck as the players moves around the fretboard; if the fret end angle is too shallow then the string can easily start to slip off the end of the fret.
It is also surprising just how much of the fretboard space is used up by the bevels - a 45 degree bevel will use about 1mm of the fret wire and so reduce a 43mm neck to 41mm playable width. These bevel files can be made to any angle as low as zero and to a maximum of 60 degrees (please enquire).
The cutting file is a fine grit diamond file which leaves a good finish and all that is needed is the final light sanding to remove any scratches or uncomfortable edges and finally a polish.

FREE With This Item
• Advice Sheet on use of this tool
• A comprehensive guide to fret replacement

This Item Dispatch Time ** Order by 2pm for SAME DAY DISPATCH **
 
Shipping Method 
UK Royal Mail 1st Class Signed For
InternationalRoyal Mail International Airmail Tracked
 
  SHIPPING COSTS FOR THIS PRODUCT
  SINGLE ITEM SHIPPING COST
(Full Rate)
COMBINED SHIPPING COST
(at 75% Discount)
UK: FREE FREE
Europe: £7.30 £1.83
Worldwide: £10.50 £2.63
Combined Shipping Costs
The cost is calculated as
1) The item with the highest postal rate is charged at full rate
2) ALL additional items are charged at the discounted rate of 75%

TOTAL SHIPPING COST =
(Highest Postal Cost Item @ Full Rate) + (Additional items @ Discounted Rate)


PLEASE CLICK HERE TO GO TO OUR DELIVERY INFORMATION Page FOR FURTHER SHIPPING INFORMATION
Dimensions
Length 150mm File Length
Materials
File Diamond File set at 35 Degree Angle
File Grit Fine
Handle Low Friction High Engineering Grade Polymer

Description

These are TWO fret end bevel files where each has a diamond file mounted in a handle which allows it to be guided along the fretboard with the file cutting an accurate bevel on the fret ends.

One tool has the file set at 90 Degrees (for cutting the frets level with the fret board) and the second tool has the file set at 35 degrees to bevel the fret ends .

The handle is constructed from European Beech Hardwood and the base, the surface which glides along the fretboard, is made of a very low friction, high grade engineering polymer.
These files last for many fretboards and are equally long lasting on stainless frets and normal nickel silver frets.

Dimensions
• 90 Degree Angle Bevel File
• 35 Degree Angle Bevel File
• Each tool fitted with 150mm File Length
• Fine Grit Diamond File Fittted

Features
• The 90 degree file is used for filing the ends of the frets level with the ends of the fretboard.
• The 35 degree file is then used for bevelling the fret end.
• Very comfortable to hold file.
• Diamond File permanently bonded into handle.
• The file protrudes from the holder so you can see how the cut is progressing.
• Smooth base made of low friction polymer, with bevelled at the ends. This base makes it easy to pass over the fret tops without bumping or damage.
• Robust construction from highest grade engineering polymer and professional quality diamond file.
• Suitable for Stainless Steel frets.

Fret Beveling in General.
The main advantage of using a Bevel File is that a really consistent professional job is achieved where all the fret ends are at the same angle. The 90 degree file is to be used for filing the ends of the frets level with the ends of the fret board. After this, you can then bevel the frets with the 35 degree file.
This main point about bevelling is to make sure there are no sharp edges or uncomfortable fret ends which hamper playing. If a fret end is too long then it disturbs the feel of the neck as the players moves around the fretboard; if the fret end angle is too shallow then the string can easily start to slip off the end of the fret.
It is also surprising just how much of the fretboard space is used up by the bevels - a 45 degree bevel will use about 1mm of the fret wire and so reduce a 43mm neck to 41mm playable width. These bevel files can be made to any angle as low as zero and to a maximum of 60 degrees (please enquire).
The cutting file is a fine grit diamond file which leaves a good finish and all that is needed is the final light sanding to remove any scratches or uncomfortable edges and finally a polish.

FREE With This Item
• Advice Sheet on use of this tool
• A comprehensive guide to fret replacement

Shipping

Shipping Method 
UK Royal Mail 1st Class Signed For
InternationalRoyal Mail International Airmail Tracked
 
Dispatch Times Most items are dispatched within 1 working day
Custom Made items are dispatched between 3 to 10 days of order placement
 
  SHIPPING COSTS FOR THIS PRODUCT
  SINGLE ITEM SHIPPING COST
(Full Rate)
COMBINED SHIPPING COST
(at 75% Discount)
UK: FREE FREE
Europe: £7.30 £1.83
Worldwide: £10.50 £2.63
Combined Shipping Costs
The cost is calculated as
1) The item with the highest postal rate is charged at full rate
2) ALL additional items are charged at the discounted rate of 75%

TOTAL SHIPPING COST =
(Highest Postal Cost Item @ Full Rate) + (Additional items @ Discounted Rate)


PLEASE CLICK HERE TO GO TO OUR DELIVERY INFORMATION Page FOR FURTHER SHIPPING INFORMATION

Specification

Dimensions
Length 150mm File Length
Materials
File Diamond File set at 35 Degree Angle
File Grit Fine
Handle Low Friction High Engineering Grade Polymer
Chris Alsop Guitar © 2018