** SAME DAY DISPATCH and FREE UK SHIPPING on many items ** Contact Us: chris@chrisalsopguitar.co.uk
Fretting Hammer with 2 heads.  20mm Brass and Rubber Faces
Fretting Hammer with 2 heads.  20mm Brass and Rubber Faces Fretting Hammer with 2 heads.  20mm Brass and Rubber Faces Fretting Hammer with 2 heads.  20mm Brass and Rubber Faces Fretting Hammer with 2 heads.  20mm Brass and Rubber Faces Fretting Hammer with 2 heads.  20mm Brass and Rubber Faces Fretting Hammer with 2 heads.  20mm Brass and Rubber Faces
Fretting Hammer with 2 heads. 20mm Brass and Rubber Faces
£26.36 each + £4.45 p&p (UK) Shipping
Dispatched within 5 days
MPN: TF011   EAN: 5060489150141  In Stock
Ask Us A Question

Fretting Hammer with two 20mm faces of Brass and Rubber, designed and manufactured by Chris Alsop.

Specification
This hammer is supplied with two 20mm diameter faces - it weighs 175g.
The hammer is 280mm in length. The hardwood handle is made from close grained Ash. It has replaceable heads that screw in - one is brass and the other hard rubber.

The main body is made from aluminium bar tapered down to 20mm each end, drilled and tapped with an M16 Coarse thread.

About half the weight (87g) is in the body and half in the handle, which results in the centre of gravity about 1/3 the way along the handle from the head - this is ideal for simultaneous control and ease of use. The eye (the hole in the hammer head) of the hammer is properly milled and is a conical oval shape wider at the end allowing a 2mm wide hardwood hammer wedge to be used to secure the head and make it safe. Traditional hammer design and craftsmanship is used throughout and the hammer stale is particularly robust for a hammer this size, which adds to the strength and comfort in use.

Faces
This hammer has enough weight to make the frets to go in easily, but not too much weight to over do it. It is well balanced allowing both good aim and control.

The specially shaped handle allows good control over direction of the head. It allows you to feel confident about hitting the frets in just the right place, in the right direction with the right amount of force. A good job results with minimal high or low spots of the frets.

The heads - one rubber and one brass - complement each other. The rubber head allows a wide spread of a low impulse across the fret, and the brass head allows a precise tap of a high impulse in a specific place.

Both heads are well rounded at the edges.

The handle is sanded to have a smooth finish and is heavily treated with linseed oil to condition the wood. The handle can be gripped firmly without slipping.

The Ash wood handle is fashioned so it gives the right balance and feel. The hardwood used is close grained Ash which is both light, tough and flexible. The handle is shaped to bulge to a relatively large thickness at the midpoint- which makes it easy to apply many accurate small taps to seat the fret properly.

Both the rubber and the brass heads will not dent the fret wire.

Design and Manufacture:
The hammer is made by Chris Alsop, in his Woodville Guitar workshop, to a design that is tried and tested for accurate fret installation.

A comprehensive guide to fret replacement is included

Re-Fretting Tools:
To help decide the best fretting hammer (made in house by Chris Alsop) or mallet (panel mallet made by "AmTech" - proven OK for fretwork) for your fretwork a picture is included showing all three that we sell together.



';

This Item Dispatch Time Dispatched within 5 days
 
Shipping Method 
UK Royal Mail 1st Class Signed For
InternationalRoyal Mail International Airmail Tracked
 
  SHIPPING COSTS FOR THIS PRODUCT
  SINGLE ITEM SHIPPING COST
(Full Rate)
COMBINED SHIPPING COST
(at 75% Discount)
UK: £4.45 £1.11
Europe: £10.15 £2.54
Worldwide: £12.45 £3.11
Combined Shipping Costs
The cost is calculated as
1) The item with the highest postal rate is charged at full rate
2) ALL additional items are charged at the discounted rate of 75%

TOTAL SHIPPING COST =
(Highest Postal Cost Item @ Full Rate) + (Additional items @ Discounted Rate)


PLEASE CLICK HERE TO GO TO OUR DELIVERY INFORMATION Page FOR FURTHER SHIPPING INFORMATION
Dimensions
Diameter 20mm Face Diameter
Weight 175g Approx
Length 280mm
Materials
Materials Brass and Rubber Faces
Handle Ash

Description

Fretting Hammer with two 20mm faces of Brass and Rubber, designed and manufactured by Chris Alsop.

Specification
This hammer is supplied with two 20mm diameter faces - it weighs 175g.
The hammer is 280mm in length. The hardwood handle is made from close grained Ash. It has replaceable heads that screw in - one is brass and the other hard rubber.

The main body is made from aluminium bar tapered down to 20mm each end, drilled and tapped with an M16 Coarse thread.

About half the weight (87g) is in the body and half in the handle, which results in the centre of gravity about 1/3 the way along the handle from the head - this is ideal for simultaneous control and ease of use. The eye (the hole in the hammer head) of the hammer is properly milled and is a conical oval shape wider at the end allowing a 2mm wide hardwood hammer wedge to be used to secure the head and make it safe. Traditional hammer design and craftsmanship is used throughout and the hammer stale is particularly robust for a hammer this size, which adds to the strength and comfort in use.

Faces
This hammer has enough weight to make the frets to go in easily, but not too much weight to over do it. It is well balanced allowing both good aim and control.

The specially shaped handle allows good control over direction of the head. It allows you to feel confident about hitting the frets in just the right place, in the right direction with the right amount of force. A good job results with minimal high or low spots of the frets.

The heads - one rubber and one brass - complement each other. The rubber head allows a wide spread of a low impulse across the fret, and the brass head allows a precise tap of a high impulse in a specific place.

Both heads are well rounded at the edges.

The handle is sanded to have a smooth finish and is heavily treated with linseed oil to condition the wood. The handle can be gripped firmly without slipping.

The Ash wood handle is fashioned so it gives the right balance and feel. The hardwood used is close grained Ash which is both light, tough and flexible. The handle is shaped to bulge to a relatively large thickness at the midpoint- which makes it easy to apply many accurate small taps to seat the fret properly.

Both the rubber and the brass heads will not dent the fret wire.

Design and Manufacture:
The hammer is made by Chris Alsop, in his Woodville Guitar workshop, to a design that is tried and tested for accurate fret installation.

A comprehensive guide to fret replacement is included

Re-Fretting Tools:
To help decide the best fretting hammer (made in house by Chris Alsop) or mallet (panel mallet made by "AmTech" - proven OK for fretwork) for your fretwork a picture is included showing all three that we sell together.



';

Shipping

Shipping Method 
UK Royal Mail 1st Class Signed For
InternationalRoyal Mail International Airmail Tracked
 
Dispatch Times Most items are dispatched within 1 working day
Custom Made items are dispatched between 3 to 10 days of order placement
 
  SHIPPING COSTS FOR THIS PRODUCT
  SINGLE ITEM SHIPPING COST
(Full Rate)
COMBINED SHIPPING COST
(at 75% Discount)
UK: £4.45 £1.11
Europe: £10.15 £2.54
Worldwide: £12.45 £3.11
Combined Shipping Costs
The cost is calculated as
1) The item with the highest postal rate is charged at full rate
2) ALL additional items are charged at the discounted rate of 75%

TOTAL SHIPPING COST =
(Highest Postal Cost Item @ Full Rate) + (Additional items @ Discounted Rate)


PLEASE CLICK HERE TO GO TO OUR DELIVERY INFORMATION Page FOR FURTHER SHIPPING INFORMATION

Specification

Dimensions
Diameter 20mm Face Diameter
Weight 175g Approx
Length 280mm
Materials
Materials Brass and Rubber Faces
Handle Ash
Chris Alsop Guitar © 2017